Lo Chlor - Stain and Scale Attack Part 1 & Part 2

Features and Benefits

• Concentrated calcium scale remover
• Can also be used as an effective copper stain remover
• This product works best at pH 7.0
• Make sure the chlorine level is below 1.0ppm (High chlorine levels will neutralise this product)
• This works very slowly. Please be advised it could be up to 6 weeks before noticing results.
• Do not sprinkle onto pool surface. This must be mixed in a bucket of water first.

Dosage

• 2 x 1Kg Packs treat up to 50,000 Litres of pool water.
• Add 1Kg of Part 1 to a bucket of water and mix until dissolved. Then add 1Kg of Part 2 into the same solution. 
• Once mixed thoroughly pour around the perimeter of your pool.

Important Notes

• After the solution is mixed thoroughly try to pour over as great an area as possible.
• Immediately after the addition of the solution your pool will go cloudy. This cloudiness should disappear within 5-10 minutes.
• Allow to filter for at least 24 hours after application.
• Re-balance pool after 5-7 days.
• Allow at least 4-6 weeks before you can expect to see any results.

Please contact us if you need further information.